Tips For Kitchen Cabinet Painting
To get the best results, remove cabinet doors before painting. This will prevent drips and allow you to paint the entire cabinet. Keep cabinet doors out of the way as you work, as they can get bumped when they’re drying. Here are some tips for kitchen cabinet painting. You can use one or a combination of paints. Then, follow the instructions on the paint canister for best results. And once you’ve finished the paint job, enjoy your new cabinets!
Benjamin Moore Advance
If you’re ready to give your kitchen cabinets a new look, you can apply Benjamin Moore Advance to them. This paint is available at most Benjamin Moore dealers. It is best for areas that require a hard, durable finish. Because Advance takes about 30 days to dry, you should avoid touching it with your hands. It is also a good idea to avoid messes while brushing or rolling it. Advance will dry better over time, so make sure you don’t make too many.
If you’re planning on painting your cabinets yourself, Benjamin Moore Advance is an excellent choice. This paint dries faster than other brands and cures in five days. Once it has cured, you can open and close your cabinets the same day. Benjamin Moore Advance is a high-quality, durable enamel, so it is recommended for a wide range of applications from interior doors and trim to cabinets. You can also use it on wood surfaces and prime them yourself.
Sherwin Williams Emerald(r) Urethane Trim Enamel
If you’re looking for a beautiful, durable finish https://www.encorepaintingltd.com/cabinet-painting/ for your kitchen cabinets, consider using Sherwin Williams Emerald(r) Uretethane Trim Enamel. It’s available in three finishes and dries to the touch in two hours. This paint is great for heavy-traffic areas, since it won’t sag or crack during drying.
Before starting the process of painting your kitchen cabinets, you should prepare the surface first. Some SW paints may not be appropriate for use on your cabinets, because they won’t bond with the surface. Soft paints, for instance, are formulated for walls and trim, and they will need additional prep work. Emerald urethane paint is a good option, as it dries harder than ProClassic.
Valspar Cabinet Enamel
There are some pros and cons to using Valspar Cabinet Enamel for your kitchen cabinet painting project. Among those is its low cost and its ease of use. The paint requires two to three coats to complete the job, and you don’t need to use primer or glossers. This product does not produce a pronounced smell, so you can paint your cabinets without the use of a nose mask.
Using Valspar Cabinet Enamel for your kitchen cabinet painting project is easy, and you can get a custom color match with no prep time. The paint comes in two different finishes: satin and semi-gloss. You can also mix and match any color, and you don’t need to sand. You can also paint your trim using Valspar’s Door and Trim Enamel base 4.
Sherwin Williams Extreme Bond Primer
Before you start painting your kitchen cabinets, you should prepare them for the new paint. Use Sherwin Williams Extreme Bond Interior and Exterior Primer, which is designed for a hard glossy surface. It requires very little surface preparation and is compatible with a wide range of topcoats. If you are painting the inside of your kitchen cabinets, you might want to tint the primer to make it a lighter color.
Prepare the surface of your cabinets by lightly sanding them with 100-150 grit sandpaper before applying the primer. Do not sand all of the cabinetry, but just enough to make it easier to apply the paint. If you do not have sandpaper, you can also use a de-glossing solution and abrasive pad. Make sure to use protective gear while applying the de-glossing liquid, as you could get abrasive dust. Make sure to clean up the dust with a tack cloth.